1 3

Encres Monarch

Stark Noir LB

Stark Noir LB - 1 gallon

SKU:

$97.00 CAD
$97.00 CAD
Vente Épuisé
Frais d'expédition calculés à l'étape de paiement.

Stark Black LB fait partie du système de mélange Monarch VIVID.

 

Le noir Monarch Stark Black LB est un noir haute performance dense, foncé, sans phtalate et sans plomb qui offre une excellente couverture sur toutes les couleurs de vêtement. Sa formule à faible adhérence permet d'imprimer à travers des mailles plus fines sans utiliser de modificateur de viscosité. Le Stark Black fonctionne bien sur les presses automatiques et manuelles. Il présente une bonne faible migration pour l'impression sur le polyester et les mélanges de polyester.

 

Substrat :

Tissus en polyester, mélanges de polyester, trois mélanges, poly/coton et coton.


    Taille

    In stock

    disabled

    Product Resources

    Afficher tous les détails

    Souvent achetés avec

    Additional Information

    • Creamy, short body plastisol.

    • User friendly, no viscosity modifiers necessary.

    • Formulated to be non-phthalate.

    • Fast flash

    • Dense black with great coverage

    • Good bleed resistance at a wide temperature range

    • Dark, dense, black color

    • Wet Ink Tack: Low

    • Surface Appearance: Satin Finish

    • Bleed Resistance: Good

    • Opacity: High

    • Gel point: 160 °F

    • Flash Temp: 240° - 260°F

    • Fusion Temp: 320° F

    • Squeegee Blade: 70° - 80° durometer

    • Mesh Count: 86 – 236 mc in

    Print Stark Black LB straight from the container through mesh ranging from 86 to 236 mc without modifications of the viscosity. Use finer mesh counts for softest hand and good opacity. Stir ink before use.

    65°F to 95°F avoid direct sunlight. Never exceed temperatures above 95°F during storage.

    Stir plastisol ink before printing. Any modifiers and additives should be mixed in clean containers using clean mixer blades and ink knives. Any contamination from other ink sources could make the ink test positive for restricted phthalates. Do not dry clean, iron or bleach the printed image.

     

    Perform fusion tests before production. Failure to cure ink properly can result in poor wash fastness, inferior adhesion, and unacceptable durability.

     

    Adjust flash cure temperature and dwell time so ink is just dry to touch. Avoid excessive flash temperatures to protect fabric and migration of dyes. If surface is hot and tacky, the ink film has been over flashed. Reduce temperature or time to prevent an inter-coat adhesion problem.

     

    Curing is a time and temperature process, a lower oven temperature setting with a slower belt speed while maintaining recommended ink cure temperature is always best to protect fabric, control dye migration and reduce energy consumption.

     

    Stark Black LB can be cured at 320°F. Running at the higher temperatures and/or longer dwell times maybe required to achieve proper cure on jobs that contain cotton, high ink deposits or heavy weight garments.

     

    *Note: Poorly dyed polyester or too much heat in the curing process can overcome any low bleed inks ability to block the migration. For sever migration use a barrier base underlay.